H16 (Japanese Cars) LED Fog Lights & Day Time Running Lights Yellow (3000K), White (6000K), Ice Blue (8000K) – 2 Bulbs

100W 20000LM H16 (Japanese Cars) LED Fog Lights & Day Time Running Lights

Upgrade your old halogen headlight to the LED lights for your vehicle which will also increase your driving safety. CARSA LED Headlight Bulbs fit all weather conditions, especially rainy, snowy, foggy, and more extreme weather.

The cool white lights at 3000K, 6000K, and 8000K offer clear vision at night with the best penetrating force, offer a clear view on rainy days, fog or snow, and safe driving!

These bulbs are plug-and-play replacements for your standard halogen bulbs, then no modifications to your vehicle are necessary for installation. Get both a sleek look for your ride and improved visibility for safer driving at night with the CARSA LED Headlight Bulb.

HIGH-EFFICIENCY CSP-LED CHIPS

CARSA H11 LED headlight bulbs adopt 12 pcs of highly bright CSP LED chips in each bulb, providing a total of 100W, 20000LM light output per set. 3 X brighter than stock bulbs. 3000K Yellow, 6000K cool white, 8000K ie white. Let you see everything at night. A huge upgrade for halogen bulbs.

COMPATIBLE WITH 99% OF THE VEHICLES

Can-bus Ready Design:  An upgraded driver with built-in intelligent IC and temperature control ensures lamps work at the best status without error or radio interference.

EFFICIENT COOLING SYSTEM & 50,000 HOURS LIFE SPAN

The whole aviation aluminum body and 12,000RPM cooling fan provide supercooling ability, which ensures a longer-lasting of up to 50,000 hours.

We understand that it can sometimes be a confusing experience when trying to find the right bulb for your car online. If you are not sure which model is compatible with your vehicle please ask us. We will find the correct type of bulb for you.

Installation Guide:

Make sure the engine is off and cold.

Always change the bulbs at the same time – keeping the old with the new usually burns both very quickly.

Make sure the latches around the bulbs are fastened properly.

If the LED bulb does not light up after the installation, flip the plug around, and reconnect. Make sure the positive matches with the negative poles.

Please note they might not be used as DRL, they may flicker or can’t turn on due to the low voltage of DRL. Please ensure you turn the DRL function off and ONLY turn the high beam function on.